Model
The Model panel on the BimSpeed.ARC tab lists the following configured command groups; verify availability in the installed edition.
Create Lintel
Auto-create lintels at door locations.
See steps, settings and verification.
Split Wall Layers
Split wall layers into independent objects for better management.
See steps, settings and verification.
Cut Wall
Auto-cut wall openings at intersections with beams or pipes.
See steps, settings and verification.
Split Wall
Split walls at intersections with other objects.
See steps, settings and verification.
Wall Location Line
Quickly change wall Location Line for multiple walls at once.
See steps, settings and verification.
Plaster
Auto-create plaster layers for structural beams and slabs.
See steps, settings and verification.
Plaster By Face
Create plaster layers by selecting element faces directly.
See steps, settings and verification.
Finish Rooms
Auto-create floor and wall finishes based on Room space.
See steps, settings and verification.
Finish Rooms Quickly
Tool for quickly creating floor and wall finishes for multiple rooms.
See steps, settings and verification.
Finish Rooms Settings
Wall and Floor Finish Settings
See steps, settings and verification.
Tile Studio
Lay out floor and wall tiles from an origin tile; detail every cut, combine offcuts, track scrap and write the tiles to the model in 3D.
Read the detailed Tile Studio guide with annotated screenshots and practice model.
Create Floor
Quickly auto-create floors based on beam boundaries.
See steps, settings and verification.
Pick Faces Area
Calculate area